Copper Pitting and Brass Dezincification: Physical and Chemical Effects

Abstract

Establishes definitively whether certain chemical constituents inhibit or accelerate copper pitting corrosion. Examines the impacts of water chemistry on dezincification. Determines the extent to which differential flow and water chemistry interact to cause non-uniform corrosion failures in single-metal systems and those with dissimilar needs. Published in 2011.

Resources

Subscriber

Copper Pitting and Brass Dezincification: Chemical and Physical Effects

Report

#4289

09/30/2011

View Executive Summary

Related Projects

Recently

Project #4317

Non-Intrusive Methodology for Assessing Lead and Copper Corrosion

Completed

This project developed, validated, and demonstrated a portable device that allows water utilities to monitor lead and copper values without engaging in household tap sampling. This monitoring provided...

View more details

Project #4064

Water Chemistry Effects on Dissolution Rates of Lead Corrosion Products

Completed

Summarizes the state-of-knowledge regarding dissolution rates of lead corrosion products. Also assesses the effect of changes in water chemistry on lead concentrations in distribution systems by (1) quantitatively...

View more details

Project #4015

Effect of Nitrification on Corrosion in the Distribution System

Completed

Identifies the role of nitrification-induced changes to water quality that may affect corrosion in the distribution system. Also examines the potential significance of nitrification on lead and copper...

View more details

Project #5081

Guidance for Using Pipe Rigs to Inform Lead and Copper Corrosion Control Treatment Decisions

In Progress

View more details

Project #5152

Identifying Service Line Materials without Excavation: Distinguishing LSLs from Non-LSLs

In Progress

Many drinking water utilities are conducting lead service line replacements to safeguard public health. However, lead service lines (LSLs) cannot be replaced until their locations are identified. There...

View more details

Project #5119

Using Phosphate-Based Corrosion Inhibitors and Sequestrants to Meet Multiple Water Treatment Objectives

In Progress

To protect public health and maintain regulatory compliance, utilities are seeking additional resources for optimizing corrosion control treatment, with specific interest in phosphate-based corrosion inhibitors. Through collaboration with...

View more details

Transforming Aeration Energy in Water Resource Recovery Facilities (WRRFs) through Suboxic Nitrogen Removal - Part 3

Copper Pitting and Brass Dezincification: Physical and Chemical Effects

Abstract

Resources

Copper Pitting and Brass Dezincification: Chemical and Physical Effects

Non-Intrusive Methodology for Assessing Lead and Copper Corrosion

Water Chemistry Effects on Dissolution Rates of Lead Corrosion Products

Effect of Nitrification on Corrosion in the Distribution System

Guidance for Using Pipe Rigs to Inform Lead and Copper Corrosion Control Treatment Decisions

Identifying Service Line Materials without Excavation: Distinguishing LSLs from Non-LSLs

Using Phosphate-Based Corrosion Inhibitors and Sequestrants to Meet Multiple Water Treatment Objectives

Transforming Aeration Energy in Water Resource Recovery Facilities (WRRFs) through Suboxic Nitrogen Removal - Part 3